Galvanic isolator for EX i approved detectors connected to the detector loop. For up to 20 detectors. External 24V DC power supply is required.
BZ-500 is a barrier unit designed for intrinsically safe
installation of detectors in hazardous area zone 0, 1
or 2. The barrier is a galvanic isolator; hence the
installation requires no PE conductor.
BZ-500 must be installed in safe area and is
connected to the Al_Com detector loop.
Also a separate 24 V supply is required. If BZ-500 is
supplied from the panel, an optional 24 V DC/DC
converter must be used to regulate the power.
The loop branch off into the
hazardous area accepts 1-20 loop units depending
on cable type and loop unit type. All loop units must
be Exi approved.