AutroSafe 4 fire detection system

AutroSafe is our high-end fire detection system for large and complex buildings. Since the launch in 1999, it has proven its unique stability and reliability in more than 15 000 installations worldwide, from hotels to cruise ships to drilling platforms.

AutroSafe 4 provides advanced functionality for a wide range of applications. The system is designed to meet all requirements in the high-end segment of the onshore, maritime and offshore market, and is certified according to Marine Equipment Directive (MED) for Wheel marking, Construction Products Directive (CPD) for CE marking, both requiring EN 54-2 and 4 compliance, and Factory Mutual (FM) approval according to NFPA 72.

Reliable communication is paramount to your safety. That’s why we have added AutroNet to the AutroSafe system, an innovative network solution safeguarding communication between panels. AutroNet ensures a redundant and high-speed network expanding the reach of the AutroSafe system even further. The system can be set up either in a star or ring network, depending on your needs.

A maximum of 64 system units (panels, controllers) can be connected to the AutroNet. The system has a great capacity, and the fact that all types of loop units can be connected to the same detection loop gives large flexibility. Uploading of configuration data or system software to the entire system can be done from one single point. The USB port is used for downloading data from a USB memory stick.

Maximum capacity

 Panels per system: 64
 Detection loop per panel: 6/12*
 Loop units per loop: 127**
 Loop units per PowerLoop: 15**
 Units per AutroFieldBus: 31
 Alarm units per loop: 40**
 Loop units per panel, ref. EN 54: 512 
 Ethernet ports: 2
 RS232/RS422/RS485: 1
 AutroFieldBus interface: 1
 USB port 1


* Max. 12 loops per panel/controller, where 
   6 can be placed inside the cabinet.
** Depending on cable choice

 

Products:

Illustrasjonsbilde

Fire alarm control panel BS-420

BS-420 is a complete fire alarm control panel with full operation capabilities. The panel serves as an operating panel for one or several defined operation zones. All alarm handling and system features can be controlled and monitored from the panel.

Illustrasjonsbilde

Fire alarm control panel BS-420M

BS-420M is the main panel in the AutroSafe family. It can be used as a stand-alone panel as well as part of a network system.

Illustrasjonsbilde

Controller BC-420

The Controller serves as a connection unit for the detection loop, alarm sounders, controls and inputs.

Illustrasjonsbilde

Controller rack unit BC-440

This unit serves as a connection unit for the detection loop, alarm sounders, controls and inputs. It is a variant of the BC-420 controller prepared for rack installations.

Illustrasjonsbilde

Operator panel BS-430

The operator panel controls and handles all operations, alarm management, indications and other functions within an operation zone. No loop driver, input or output modules can be connected to this panel.

Illustrasjonsbilde

Repeater panel BU-BV-420

The repeater panel serves as either a fire brigade panel or an information panel, depending on the settings.

Illustrasjonsbilde

Fire brigade loop panel BU-110

The fire brigade loop panel enables silencing the panel’s internal buzzer, silencing alarms, and resetting the system. The panel is powered from the detection loop, providing quicker installation, reduced cabling and cost, and lowered system complexity.

Illustrasjonsbilde

Information loop panel BV-110

Th information panel is an indication device only. It provides information related to the defined operation zone(s).The panel is powered from the detection loop, providing quicker installation, reduced cabling and cost, and lowered system complexity.

Illustrasjonsbilde

Power cabinet BP-405

Power cabinet with a 5 A power pack (BPS-405), and space for two 12 V/18 Ah batteries (not included).